Universal Motors

Universal Motors is a Portuguese company, founded in 2004, dedicated to trading, production and technical support of electric motors, variable speed drives, control panels and gear reducers. Within the group there is a stock holding of around £3.5M across 3 European warehouses and they can source motors up to 5000kW.

Their products are distributed throughout the country and abroad through specialized and qualified partners. Universal Motors continuously develop their organisation and products to provide advanced technology solutions and quality services to ensure that they are reliable and trustworthy partners.

As an approved Distributor Intralogistics Aftercare Solutions has access to the entire range of products offered, a selection of which can be found below:

The Nord Drivesystems Worm geared motor range meets most drive requirements up to 15KW with a maximum output torque of 3,000 Nm.

Their ground breaking design in the 1980's was the Unicase concept with guarantees high accuracy as all bearing holes and sealing surfaces are machined in a single stage on the latest CNC centres.

The range boasts 6 sizes in the range and offer numerous benefits:

  • robust cast iron housing

  • gearing meets up to date international high standards

The Nord Drivesystems Helical Bevel geared motor range meets most drive requirements up to 200KW with a maximum output torque of 50,000 Nm.

Their ground breaking design in the 1980's was the Unicase concept with gaurentees high accuracy as all bearing holes and sealing surfaces are machined in a single stage on the latest CNC centres.

The range boasts 11 sizes in the range and offer numerous benefits:

Parallel shaft gear units / Parallel shaft geared motors from NORD Drivesystems are supplied in two product series to meet the individual requirements of each application:

The Nord Drivesystems Helical Bevel geared motor range meets most drive requirements up to 160KW with a maximum output torque of 26,000 Nm.

Their ground breaking design in the 1980's was the Unicase concept with gaurentees high accuracy as all bearing holes and sealing surfaces are machined in a single stage on the latest CNC centres.

The range boasts 11 sizes in the range and offer numerous benefits:

Braked Motors

  • Built using standard motor design

  • Available with AC or DC brake.

  • Simple low maintenance construction with high braking torque.

  • 2, 4, 6 or 8 Pole from stock from 0.18-30KW (8 Pole only up to 3KW)

  • Braking Torques 4Nm – 400Nm (8Pole only 80Nm)

 

Atex Motors

Universal Motors offer three versions:

ASA EXD

Flameproof 2, 4, 6 and 8 poles motors with rated powers from 0.09kW to 200kW.

Downloads

Three Phase Motors are supplied as standard in either Aluminium or Cast iron, although limited ranges are offered in Stainless Steel for Wash down environments.

Key Facts:

Aluminium Frame Electric Motors

  • Manufactured with a light, robust and modern design.

  • All mounting options are available.

  • Multi-mount design allows the terminal box to be positioned on both sides of the frame as well on the top (standard option).

  • 2, 4, 6 or 8 Pole from stock from 0.37-37KW (8 Pole only up to 7.5KW)

Downloads

Single Phase Motors are offered in both ‘Capacitor Start’ and ‘Capacitor Start Capacitor Run’ types.

The easiest way to find out which you need it to check the number of capacitors in the terminal box.

Capacitor Start

The capacitor is charged to provide an initial boost to get the motor started but is not required during operation, this style is generally considered for Fans, Blowers and Centrifugal pumps. The operations they carry out have a level of inertia that supports the motor in in its work.

Capacitor Start Capacitor Run

Downloads

Braked Motors

  • Built using standard motor design

The Nord Drivesystems Helical Bevel geared motor range meets most drive requirements up to 200KW

The Nord Drivesystems Helical Bevel geared motor range meets most drive requirements up to 160KW

Parallel shaft gear units / Parallel shaft geared motors from NORD Drivesystems are supplied in t

Single Phase Motors are offered in both ‘Capacitor Start’ and ‘Capacitor Start Capacitor Run’ typ

Three Phase Motors are supplied as standard in either Aluminium or Cast iron, although limited ra

The Nord Drivesystems Worm geared motor range meets most drive requirements up to 15KW with a max